We have a second hand ‘S’ TORRAGAR frameset up for the taking!

You don’t need to wait 12 weeks for it, you don’t need to hide it away from your family, you don’t even need to pay full price!

Whetted your interest? Read on…


This was a standard custom TORRAGAR with some very fine ‘all-purpose’ feature choices making this frame a true quiver killer. The features of this frame are as follows:

  • Tapered head tube to fit in a 1 1/8″ to 1 1/2′ tapered fork (requiring a ZS44/28.6 upper headset and ZS56/40 lower headset in SHIS speak).
  • Flattened underside of top tube for cyclocross demands.
  • Two bottle cages mounts for traditional hydration.
  • PF30 bottom bracket shell for future proof cranking.
  • Seat and chain stays curved to allow for 62mm of tyre clearance aboard a 622mm Ø rim i.e. 700c x 50mm recommended maximum tyre size.
  • Chain stays are also curved to allow for either 52-36 double crankset (or 42 single crankset).
  • Mounting for fenders and racks.
  • 142mm x 12mm type rear though axle. (adopting Shimano thread pattern i.e. M12 x 1.5) – Shimano AX56 through axle included in sale.
  • Internal gear and brake routing (adopting UK type braking i.e. left hand actuates the rear brake).
  • Flat mount type brake mounts.

Included in the sale is a fitted Rodeo Spork 1.2 Fork. This fork is the ideal bed buddy for the TORRAGAR and includes the following features:

  • Full carbon construction.
  • Axle to fork crown length – 396mm
  • Fork rake – 45mm
  • Tapered 1 1/8″ to 1 1/2″ steerer tube.
  • Front axle 100mm x 12mm – Included in the sale
  • Tyre clearance of 56mm on a 622mm rim (700c wheel) – therefore we would recommend up to a 45mm wide tyre.
  • Tyre clearance of 60mm on a 584mm rim (650b wheel) – therefore we would recommend up to a 50mm wide tyre.
  • Flat mount type brake mounts.
  • Internal cable routing to brake caliper.
  • Crown bolt hole for fenders / racks / dynamo light mounts.
  • Internal dynamo light cable route from inside the drive side leg to above the crown bolt hole.
  • Two rack / cage mounts on drive and non-drive side fork legs.
  • Fender mounts.


This frame’s geometry is as follows:

Location Dimension
Seat Tube (c-c) 50cm
Top Tube (c-c) 53.5cm
Head Tube Angle 71°
Seat Tube Angle 74°
Chain Stay 43.5cm
Bottom Bracket Drop 7cm
Reach 37.0cm
Stack 56.7cm
Head Tube 14cm
Fork (A-C) 39.5cm
Fork Rake 4.5cm


The normal retail price for this frameset (frame and fork) would be over £2,000 – We will would be looking for £1,500 for this frameset however we are open to offers.
This includes free UK postage and packing.  Please get in touch via if you are at all interested. If you do not reside in the UK please get in touch and we can discuss international postage.

Thanks for looking!


Hello, I’m 5’10’’ would this fit me?

Hi Chris,

Yes this should be the perfect size frame for you. I’m also 5’10” and all of my road / cyclocross / rando frames have around 535mm effective top tubes.


Leave a Reply

Your email address will not be published. Required fields are marked *